You are here:
  1. Home
  2. Technical Hub

Technical Hub

Welcome to the Technical Hub: Instant access to Tenmat’s passive fire protection datasheets—no product page clicks required.

Further documentation can be found on individual product pages.

Two long black rectangular beams and a glossy red rectangular panel on a white background.
Brick Slip Systems
A wooden beam with a metal bracket attached on top, placed on a white surface.
NVFB
Two black rectangular beams with exposed wood ends and a screw placed in front of them on a white background.
VFB 60/60
Two black rectangular beams with red labels and a black screw on a white surface.
VFB 120/120
Two rectangular red insulation boards stacked diagonally, showing yellow fibrous material inside.
VFB Plus
Two long, flat, black metal bars with red and white labels, arranged in an overlapping V shape.
FF102/25
Three flat steel bars with red and white labels, stacked and slightly overlapping on a white background.
FF102/50
A wooden plank next to two metal brackets on a white background.
FF102/50 & NVFB-WB
A red coiled strip of fire protection wrap with Tenmat branding on the end.
CavGuard Roll 65
Two electrical outlet faceplates, boxes, and wall cutouts arranged in two rows on a white background.
Socket Box Covers
Two rectangular beige cardboard trays with white outer bases, shown side by side, one larger than the other.
Socket Box Inserts
Rectangular red and grey fire protection sleeve with Tenmat logo on its surfaces.
Vent Duct Fire Sleeve LP
Red cylindrical pipe section with the Tenaris logo on a white background.
Vent Duct OverSleeve
Three cylindrical rings (white, red, and black) stacked in an exploded view on a white background.
Ceiling Fan Fire Stop
Two round, white air vents; one open showing a red interior and blade, the other closed.
Fire Rated Ceiling Air Valves
A cross-section of a tiled floor with a metal floor expansion joint covered by a beige cap.
FF130 Luminaire Covers
3D diagram of attic insulation with a roll of insulation material between roof beams and above a floor plan.
Loft Covers
Cone-shaped ceiling light with a textured black shade and copper supports, viewed from below.
FF109 Downlight Covers
Three hollow cylindrical metal pipes of varying diameters are arranged side by side on a white background.
FF109 Pipe Fire Sleeves
Red cylindrical pipe sleeve with “Tenmat” branding, hollow interior, angled to the right on a white background.
OverSleeves
Seven variously shaped brown gaskets with holes are arranged on a light surface.
Firefly FF700
Seven variously shaped brown gaskets with holes are arranged on a light surface.
Firefly FF800
Seven variously shaped brown gaskets with holes are arranged on a light surface.
Firefly FF900